arrowret.blogg.se - Standard sata ahci controller driver update windows 10

Standard sata ahci controller driver update windows 10 code#

If you can’t boot into WinRE either, you’ll have to boot using an installation media or recovery drive.

Now, type chkdsk c: /r, replace c: with the drive letter from Step 3 if different, and press Enter.

Execute the following commands and note the system drive’s letter:.

Select Troubleshoot > Advanced Options > Command Prompt.

Force reboot your computer 3 times in a row to boot into winRE.

If you’re unable to boot normally, you must run CHKDSK via the Windows Recovery Environment (WinRE).

You’ll be prompted to run CHKDSK on the next restart.

Type chkdsk c: /f /r, replace c: with the system partition if different, and press Enter.

Press Win + R, type cmd, and press Enter.

If you’re able to boot normally, follow the steps listed below to run CHKDSK: CHKDSK will be helpful for locating and possibly repairing any such blocks. Use CHKDSKĪs stated, the I/O status codes 0xC000009C and 0xC000016A indicate that bad sectors present on the disk prevented data from being read.

Standard sata ahci controller driver update windows 10 code#

But if the status code is an obscure one, it may be better to look it up online first. If the BSOD in your case falls into any of these categories, you can apply the appropriate solutions below to fix this BSOD. We’ve listed the most common I/O status codes above. In the case of older Parallel ATA (IDE) drives, it can also indicate an incorrect master/slave drive configuration. This status code indicates cable or drive failure. Additionally, defective cabling or bad termination on SCSI devices can also lead to this status code. Two devices are trying to use the same IRQ. STATUS_DISK_OPERATION_FAILED (0xC000016A).If there’s improper termination or the controller doesn’t see the hard disk, that can also lead to this status code. The device is likely not connected due to loose or defective cables. STATUS_DEVICE_NOT_CONNECTED (0xC000009D).STATUS_INSUFFICIENT_RESOURCES (0xC000009A).Here are some common status codes for Parameter 2: By checking Parameter 2, you can narrow down the cause a lot more.

The KERNEL_DATA_INPAGE_ERROR occurs as a result of defective hardware (storage drives, cabling, RAM), a damaged file system, or a virus infection.